Darija with fouad

Dan Walker Dan Walker

0 Course Enrolled • 0 Course Completed

Biography

Free PDF Quiz 2025 Cisco Perfect 300-410: Implementing Cisco Enterprise Advanced Routing and Services Quiz

BONUS!!! Download part of DumpsTests 300-410 dumps for free: https://drive.google.com/open?id=1drsFeTLlmn--HEAqAJY_QviwQ6eyXHL5

As is known to us, the high pass rate is a reflection of the high quality of 300-410 study torrent. The more people passed their exam, the better the study materials are. There are more than 98 percent that passed their exam, and these people both used our 300-410 Test Torrent. We believe that our 300-410 test torrent can help you improve yourself and make progress beyond your imagination. If you buy our 300-410 study torrent, we can make sure that our study materials will not be let you down.

What You Will Learn in Cisco 300-410 Exam

Contact us for this Cisco 300-410 exam and get the job quickly. Operating Cisco IOS devices is one of the skills covered in the CCENT objectives. Systems Management, Cisco IOS troubleshooting and unit configuration are some of the other topics. Product Description of Cisco 300-410 Exam is available for you. Serve as a reliable technician who troubleshoots the problems with the Cisco devices. Drag and Drop questions are included in this product. Drop the topic in the time allotted in the practice test. Choice of exam preparation material is offered here. Fear no more to sit for the Cisco 300-410 Exam. Excellent answer for Cisco certification exams. Content of Practice Test for CCENT is available for you. Stuck in a difficult situation with the questions from your 300-410 exam. Drop all of your fears and get the latest Cisco 300-410 exam dumps for questions and answers. Comments and suggestions for the preparation of 300-410 exam. Get prepared for successful 300-410 certification exam. Grouppage is the reliable source for the certification exam preparation.

>> 300-410 Quiz <<

Valid Cisco 300-410 Exam Questions are Conveniently Available in PDF Format

As the quick development of the world economy and intense competition in the international, the world labor market presents many new trends: company’s demand for the excellent people is growing. As is known to us, the 300-410 certification is one mainly mark of the excellent. If you want to improve your correct rates of exam, we believe the best method is inscribed according to the fault namely this in appearing weak sports, specific aim ground consolidates knowledge is nodded. Our 300-410 Guide Torrent will help you establish the error sets. We believe that it must be very useful for you to take your exam, and it is necessary for you to use our 300-410 test questions.

Cisco Implementing Cisco Enterprise Advanced Routing and Services Sample Questions (Q365-Q370):

NEW QUESTION # 365

Refer to the exhibit. After reloading the router an administrator discovered that the interface utilization graphs displayed inconsistencies with their previous history in the NMS. Which action prevents this issue from occurring after another router reload in the future?

A. Rediscover all the router interfaces through SNMP after the router is reloaded
B. Configure SNMP to use static OlDs referring to individual router interfaces
C. Save the router configuration to startup-config before reloading the router
D. Configure SNMP interface index persistence on the router

Answer: D

NEW QUESTION # 366
Refer to the exhibit.

An engineer is trying to add an encrypted user password that should not be visible in the router configuration. Which two configuration commands resolve the issue? (Choose two)

A. service password-encryption
B. username Admin secret Cisco@maedeh motamedi
C. username Admin password 5 Cisco@maedeh motamedi
D. username Admin password Cisco@maedeh motamedi
E. password encryption aes
F. no service password-encryption

Answer: A,B

NEW QUESTION # 367
Refer to the exhibit.

A network administrator is discovering a Cisco Catalyst 9300 and a Cisco WLC 3504 in Cisco DNA Center.
The Catalyst 9300 is added successfully However the WLC is showing [ error "uncontactable" when the administrator tries to add it in Cisco DNA Center. Which action discovers WLC in Cisco DNA Center successfully?

A. Copy the .cert file from the Cisco DNA Center on the USB and upload it to the WLC 3504.
B. Add the WLC 3504 under the hierarchy of the Catalyst 9300 connected devices.
C. Delete the WLC 3504 from Cisco DNA Center and add it to Cisco DNA Center again.
D. Copy the .pern file from the Cisco DNA Center on the USB and upload it to the WLC 3504.

Answer: D

Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-ce

NEW QUESTION # 368
Refer to the exhibit.

R1 is configured with uRPF, and ping to R1 is failing from a source present in the R1 routing table via the GigatxtEthernet 0/0 interface. Which action resolves the issue?

A. Remove the access list from the interface GigabrtEthernet 0/0
B. Enable Cisco Express Forwarding to ensure that uRPF is functioning correctly
C. Modify the uRPF mode from strict to loose
D. Add a floating static route to the source on R1 to the GigabitEthernet 0/1 interface

Answer: C

NEW QUESTION # 369
Drag and drop the OSPF adjacency states from the left onto the correct descriptions on the right.

Answer:

Explanation:

Table Description automatically generated
(Reference: http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f0e.shtml) Reference: https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html Down This is the first OSPF neighbor state. It means that no information (hellos) has been received from this neighbor, but hello packets can still be sent to the neighbor in this state.
During the fully adjacent neighbor state, if a router doesn't receive hello packet from a neighbor within the Router Dead Interval time (RouterDeadInterval = 4*HelloInterval by default) or if themanually configured neighbor is being removed from the configuration, then the neighbor state changes from Full to Down.
Attempt
This state is only valid for manually configured neighbors in an NBMA environment. In Attempt state, the router sends unicast hello packets every poll interval to the neighbor, from which hellos have not been received within the dead interval.
Init
This state specifies that the router has received a hello packet from its neighbor, but the receiving router's ID was not included in the hello packet. When a router receives a hello packet from a neighbor, it should list the sender's router ID in its hello packet as an acknowledgment that it received a valid hello packet.
2-Way
This state designates that bi-directional communication has been established between two routers. Bi- directional means that each router has seen the other's hello packet. This state is attained when the router receiving the hello packet sees its own Router ID within the received hello packet's neighbor field. At this state, a router decides whether to become adjacent with this neighbor. On broadcast media and non-broadcast multiaccess networks, a router becomes full only with the designated router (DR) and the backup designated router (BDR); it stays in the 2-way state with all other neighbors. On Point-to-point and Point-to-multipoint networks, a router becomes full with all connected routers.
At the end of this stage, the DR and BDR for broadcast and non-broadcast multiaccess networks are elected.
For more information on the DR election process, refer to DR Election.
Note: Receiving a Database Descriptor (DBD) packet from a neighbor in the init state will also a cause a transition to 2-way state.
Exstart
Once the DR and BDR are elected, the actual process of exchanging link state information can start between the routers and their DR and BDR. (ie. Shared or NBMA networks).
In this state, the routers and their DR and BDR establish a master-slave relationship and choose the initial sequence number for adjacency formation. The router with the higher router ID becomes the master and starts the exchange, and as such, is the only router that can increment the sequence number. Note that one would logically conclude that the DR/BDR with the highest router ID will become the master during this process of master-slave relation. Remember that the DR/BDR election might be purely by virtue of a higher priority configured on the router instead of highest router ID. Thus, it is possible that a DR plays the role of slave.
And also note that master/slave election is on a per-neighbor basis.
Exchange
In the exchange state, OSPF routers exchange database descriptor (DBD) packets. Database descriptors contain link-state advertisement (LSA) headers only and describe the contents of the entire link-state database. Each DBD packet has a sequence number which can be incremented only by master which is explicitly acknowledged by slave. Routers also send link-state requestpackets and link-state update packets (which contain the entire LSA) in this state. The contents of the DBD received are compared to the information contained in the routers link-state database to check if new or more current link-state information is available with the neighbor.
Loading
In this state, the actual exchange of link state information occurs. Based on the information provided by the DBDs, routers send link-state request packets. The neighbor then provides the requested link-state information in link-state update packets. During the adjacency, if a router receives an outdated or missing LSA, it requests that LSA by sending a link-state request packet. All link-state update packets are acknowledged.
Full
In this state, routers are fully adjacent with each other. All the router and network LSAs are exchanged and the routers' databases are fully synchronized.
Full is the normal state for an OSPF router. If a router is stuck in another state, it is an indication that there are problems in forming adjacencies. The only exception to this is the 2-way state, which is normal in a broadcast network. Routers achieve the FULL state with their DR and BDR in NBMA/broadcast media and FULL state with every neighbor in the remaining media such as point-to-point and point-to-multipoint.
Note: The DR and BDR that achieve FULL state with every router on the segment will display FULL
/DROTHER when you enter the show ip ospf neighbor command on either a DR or BDR. This simply means that the neighbor is not a DR or BDR, but since the router on which the command was entered is either a DR or BDR, this shows the neighbor as FULL/DROTHER.
Reference: https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html Reference: http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080093f0e.shtml) Reference: https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html

NEW QUESTION # 370
......

To pass the certification exam, you need to select right 300-410 study guide and grasp the overall knowledge points of the real exam. The test questions from our 300-410 dumps collection cover almost content of the exam requirement and the real exam. Trying to download the free demo in our website and check the accuracy of 300-410 Test Answers and questions. Getting certification will be easy for you with our materials.

300-410 Pass4sure Exam Prep: https://www.dumpstests.com/300-410-latest-test-dumps.html

BTW, DOWNLOAD part of DumpsTests 300-410 dumps from Cloud Storage: https://drive.google.com/open?id=1drsFeTLlmn--HEAqAJY_QviwQ6eyXHL5

Dan Walker Dan Walker

Biography

Join Our Community